脱模剂TR-209说明书
5 Enterprise Street, Molendinar QLD
4214 Australia
Phone: +61 7 5539 2255 Fax: +61 7 5539 1255 Email:
TR-209
Release agent
TR-209 is a PTFE Teflon hole specially made for the activity, it can clean mold surface with a layer of dense, smooth, high temperature corrosion resistance of the PTFE film, which can be effective from the polyurethane foam material, is the company specialized for building insulation materials, and daily development of new insulation materials release agent, a mold release coating can be many times, does not affect painting, bonding and other secondary processes, cutting dies used in the 1000 period from pollution, no cleaning.
Features :
Appearance transparent liquid
Density of 0.78
Flash point (℃) > 100
Suitable temperature (℃) 30-250
Advantages:
Excellent stripping effect
A continuous stripping 5-8 times after spraying
Protection of mold
No cleaning of the products
Use :
1. Before using the TR-209, the mold surface must be thoroughly cleaned
and dried, you can wash mold agent, acetone and other organic solvents will die surface dirt, grease and so clean.
2. With the TR-209 spray or brush, etc., horizontal, vertical, cross the
spray twice, volatile solvents such production after the main ingredient.
Save method:
TR-209 will be stored in 10-38 ℃, in order to ensure the best results.
More accurate, and reliable, but not identified as any express warranty.
TR-209
脱模剂
TR-209 是以特氟窿PTFE 为活性特制,它能同干净的模具表面形成一层致密、光滑、耐高温、耐化腐的PTFE 薄膜,其能够高效离型聚氨酯硬泡材料,是公司专门针对建筑保温材料,及日用保温材料研发的新型脱模剂,一次喷涂可以多次脱模,不影响上漆、粘合等二次工艺,切模具在1000次使用内不受污染,不需要清洗.
产品特点
外观 透明液体
密度 0.78
闪点(℃) >100
适合温度(℃) 30-250
产品优点:
优秀的脱模效果
一次喷涂后可连续脱模5-8次
保护模具
无需对制品进行清洗
使用方法
1. 使用TR-209之前,必须将模具表面彻底清理干净并干燥,可以洗模剂、丙酮等有
机溶剂将模具表面污垢,油渍等清洗干净。
2. 用TR-209喷涂或刷涂等方式,横、竖、交叉各喷涂两遍,等溶剂挥发后主料生
产。
储存方法
将TR-209储存于10-38 ℃,以确保最佳效果。