美国铸铁管标准
编号
中文名称 25、125、250 和 800 级铸铁 管法兰和法兰 配件 球墨铸铁管法 兰和法兰配件 Soventr 排水 系统用铸铁管 件 高温设备用锻 制或轧制合金 钢管法兰、锻 制管件、阀门 及零件规范 塑料管材、管 道和管件短时 液压故障压力 试验方法 丙铜浸入挤压 聚氯乙烯管材 和模铸管件熔 解充分性试验 方法 热塑管材和管 件耐冲击性落 锤试验方法 丙烯腈-丁二 烯-苯乙烯共 聚物塑料管材 和管件规范, 表 40 电气用热缩管 件试验方法 (10.02)
英文名称
ANSI/ASME B16.1-2005 ANSI/ASME B16.42-1998 ANSI/ASME B16.45-1998
Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800 Ductile Iron Pipe Flanges and Flanged Fittings Cast Iron Fittings for Soventr Drainage Systems Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings Test Method for Adequacy of Fusion of Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
ANSI/ASTM A182/A 182M-2001
ANSI/ASTM D1599-1999
ANSI/ASTM D2152-1995
ANSI/ASTM D2444-1999
ANSI/ASTM D2468-1996
ANSI/ASTM D2671-2000
Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02)
ANSI/ASTM D2855-1996
聚氯乙烯 (PVC)管材和 管件溶剂接合 连接件制作惯 例 含氟聚合物树 脂热缩管件规 范(10.02) 玻璃纤维(玻 璃纤维增强热 固树脂)管件 和配件获得静 水压或压力设 计基础的实施 规程(08.04) 绕组线玻璃纤 维(玻璃纤维 增强热固树 脂)管件和配 件规范 (08.04) 电绝缘用聚 1,1-二氟乙烯 热缩管件规范 (10.02) 聚乙烯塑料管 材和管道用对 接热融合聚乙 烯塑料管件规 范 用于航空喷气 机涡轮燃料的 玻璃纤维(玻 璃纤维加固热 硬化树脂)管 与管件规范. 粘合剂粘接接 头型 带密封垫的聚
Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation Practice for Obtaining Hydrostatic or Pressure Design Basis for 05
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ANSI/ASTM
Specification for Poly (Vinyl Chloride)
F1336-2002
氯乙烯(PVC) 下水道管件规 范
(PVC) Gasketed Sewer Fittings
ANSI/ASTM F1866-2005
管壁厚度 40 的 聚氯乙烯 Specification for Poly (Vinyl Chloride) (PVC)塑料排 (PVC) Plastic Schedule 40 Drainage and 水管和 DWV 装 DWV Fabricated Fittings 配管件的规范 交联聚乙烯 (PEX)管用带 盘簧的金属机 械冷压扩口式 管件规范 球墨铸铁管路 系统用聚乙烯 包装物 带球墨铸铁或 灰口铸铁螺纹 法兰的法兰球 墨铸铁管 球墨铸铁管的 厚度设计 汽车空气制动 系统中使用的 SAE J844d 非 金属管件和连 接组件的性能 要求 球面及法兰式 (压缩)套管管 件 液压管件 汽车管件接头 易燃和可燃液 Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing Polyethylene Encasement for Ductile-Iron Pipe Systems Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
ANSI/ASTM F1961-2002
ANSI/AWWA C105/A 21.5-2005 ANSI/AWWA C115/A 21.15-2005 ANSI/AWWA C150/A 21.50-2002
Thickness Design of Ductile-Iron Pipe
ANSI/SAE J1131-1998
Tubing and Fitting Assemblies Used in Automotive Air Brake Systems, Performance Requirements for SAE J844d Nonmetallic
ANSI/SAE J246-1994 ANSI/SAE J514-1998 ANSI/SAE J530-1994 ANSI/UL
Spherical and Flanged Sleeve (Compression) Tube Fittings Hydraulic Tube Fittings Automotive Pipe Fittings Standard for Safety for Tube Fittings
109-2004
体、制冷辅助 设备和船上用 管件的安全标 准 增强热固树脂 管件和配件 电气金属管件 搪瓷铸铁管道 固定件.补充 件2 搪瓷铸铁管道 固定件 铸铁管法兰及 法兰配件.等 级 25、125 和 250 铸铁螺纹排水 管件 铸青铜螺纹管 件 铸铜合金软钎 焊连接压力管 件 DWV 类铸铜合 金钎焊连接排 水管件
for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use
ANSI/UL 1684-2002 ANSI/UL 797-2004 ASME A112.19.1M Supplement 2-2 ASME A112.19.1M-1994
Reinforced Thermosetting Resin Conduit (RTRC) and Fittings Electrical Metallic Tubing (Enameled cast iron plumbing fixtures Supplement 2) (Enameled cast iron plumbing fixtures)
ASME B16.1-1998
(Cast iron pipe flanges and flanged fittings - Classes 25, 125, and 250)
ASME B16.12-1998 ASME B16.15-1985 ASME B16.18-2001 ASME B16.23-2002
(Cast iron threaded drainage fittings) (Cast bronze threaded fittings) (Cast copper alloy solder joint pressure fittings) (Cast copper alloy solder joint drainage fittings: DWV)
ASME B16.42-1998
球墨铸铁管法 兰及法兰配 (Ductile iron pipe flanges and flanged 件.等级 150 和 fittings - Classes 150 and 300) 300 管法兰和法兰 管件.NPS 1/2 - NPS 24 管法兰和法兰 (Pipe flanges and flanged fitting
s - NPS 1/2 through NPS 24) (Pipe flanges and flanged fittings - NPS
ASME B16.5-1996 ASME B16.5a
Addenda-1998
管件.NPS 1/2 至 NPS 24.附 录 高温设备用锻 制或轧制合金 钢管法兰、锻 制管件、阀门 及零件的标准 规范 铁路,船舶和 其他重型装备 在温度达到 650 华氏度 (345 摄氏度) 时使用的可锻 铸铁法兰,管 件和阀门零件 水或其他液体 用球墨铸铁管 的聚乙烯包装 物的标准实施 规程 内部增强的无 缝铜热交换器 管件的标准规 范 公称尺寸的管 件、容器隔热 层用绝热配件 覆盖物生产的 标准实施规范 石棉水泥传输 管件标准规范 丙烯腈-丁二 烯-苯乙烯共 聚物(ABS)塑 料排水管、污 水管和通气管 及其管件.附
1/2 through NPS 24; Addenda)
ASTM A 182/A 182Ma-2005
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 338-1984
Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C)
ASTM A 674-2005
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
ASTM B 903-2000
Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
ASTM C 450-2002
Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging Standard Specification for Asbestos-Cement Transmission Pipe Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM C 668-1998
ASTM D 2661-2002
表 40 聚氯乙烯 (PVC)塑料排 水管、排污管 和通风管及管 件的标准规范 衬垫聚氯乙烯 (PVC)物的下 水道管件的标 准规范 交联聚乙烯 (PEX)管用带 盘簧的金属机 械冷扩口加压 管件的标准规 范 交联聚乙烯 (PEX)管用带 金属压缩套的 冷膨胀管件的 标准规范 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D 2665a-2004
ASTM F 1336-2002
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F 1961a-2002
Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
ASTM F 2080-2005
Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
SDR9 交联聚乙 Standard Specification for Plastic 烯(PEX)管用 Insert Fittings Utilizing a Copper Crimp ASTM F 2159-2005 利用铜挤压环 Ring for SDR9 Cross-linked Polyethylene 的塑料插入管 (PEX) Tubing 件的标准规范 ASTM F 876-2005 交联聚乙烯 (PEX)管件的 标准规范 消防设备用热 塑性塑料喷水 器的管及其管 件 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
UL 1821-2003
(Thermoplasti
c sprinkler - Pipe and fittings for fire protection service)