碳纤维生产含氰废气治理
碳纤维生产工艺含氰废气治理系统
在碳纤维生产过程中会产生严重的空气污染物。如果不能在生产环节加以控制不但对空气造成严重污染而且对人们健康立即造成损害。
恩国环保企业有限公司是一家致力于空气污染治理的企业。碳纤维制造工厂使用的氧化炉和碳化炉，排放的氰化氢（HCN ）、硅化物和氮氧化物（NOX ），恩国针对这些有毒废气的治理具有丰富的实战经验。生产工厂所面临的问题，如何捕获、控制和应用，我司对其都非常熟知。
针对碳纤维碳化炉排放的高浓度废气，恩国设计专属设备，多段直接燃烧焚烧炉 （Direct Fired Thermal Oxidizer,DFTO）, 首先，氰化氢（HCN ）在还原区通过高温作用被分解。然后，其他气体进入第二个区进行氧化反应，去除效率高达99%以上并且最小化的NOx 产生。
针对氧化炉排放的高风量、低浓度废气，恩国则采用蓄热式焚烧炉（RTO ）进行治理。此款焚烧炉非常低的运行费用，并且去除效率达到98-99%以上。在热回收效率达到96%时，RTO 系统可以自给运行而不需要额外补充燃料。
恩国在全球为您设计、制造、服务和安装空气污染控制系统并配以能源回收工程。
Emission Control Systems for Carbon Fibre Processing
The carbon fibre manufacturing process can have serious environmental ramifications and be immediate danger to human health if careful consideration is not given to emission control at the production phase of these materials.
Anguil Environmental Systems, Inc. is an air pollution control provider with experience supplying systems for the destruction of Hydrogen Cyanide (HCN), Silicone and NOX emissions often produced in the ovens and furnaces of carbon fiber plants. The company is intimately familiar with the capture, control and compliance hurdles that the processing plants face.
To treat the higher concentration exhaust streams coming from the carbon fiber furnaces, Anguil has designed a specialized, multi-zone, Direct Fired Thermal Oxidizer (DFTO) whereby the nitrogen compounds are disassociated at high temperatures in an oxygen depleted chamber. The remaining gases are quenched before moving into a secondary zone where total emission destruction efficiencies are over 99% with minimal NOX generation.
For the higher flow, lower concentration oven exhaust Anguil also manufacturers a Regenerative Thermal Oxidizer (RTO). This type of oxidizer is capable of 98-99%+ destruction efficiency with very low operating costs. With achievable thermal efficiencies over 96% the RTO is capable of operating with little to no supplemental fuel use.
Anguil designs, manufactures, services and installs energy-efficient industrial air pollution control systems throughout the world.