土木工程学报--模板
刚架—斜压杆模型在密肋复合墙板 力学分析中的应用(黑二加粗)
关海涛1 王 俊2 黄鼎业1 (楷四)
(1.东南大学,江苏南京210096;2.中国建筑科学研究院,北京100013) (宋小五)
摘要:通过对14榀不同形式的密肋复合墙板试件进行水平低周反复加载、水平单调加载以及竖向单调加载试验,研究了墙板的受力特点与破坏模式以及墙板中肋梁、肋柱与填充砌块的共同工作性能。应用刚架—斜压杆简化计算模型对影响密肋复合墙板受力特点与破坏模式的主要因素进行了研究。不同算例的分析结果表明复合墙板的剪跨比、轴压比与框格的划分形式对其受力特点具有较显著的影响;外框架、肋柱和肋梁以及填充砌块对于复合墙板的受力性能分别起不同作用。
关键词:密肋复合墙板;简化计算模型;刚架—斜压杆模型(宋小五) 中图分类号:TU375.4 文献标识码:A(黑小五加粗) 文章编号:(此编号投稿时为空)
Application of the simplified mathematical model of rigid frame with diagonal strut to multi-ribbed
wall slab(times new roman小四加粗)
Guan Haitao1 Wang Jun2 Huang Dingye1(times new roman五号)
(1.Dongnan University,Nanjing 210096,China;2. China Academy of Building Research,Beijing100013,China)
Abstract : 14 specimens of the multi-ribbed wall slab were tested under low-frequency cyclic lateral loading, horizontal and vertical monotonously increased loading. The mechanical properties and failure modes of the wall slab and the interactive behavior between the infilling coal ash blocks and the reinforced ribs were analyzed based on the experimental study. The simplified mathematical model of rigid frame with diagonal strut was employed to analyze the main factors which affect the mechanical properties and failure modes of the multi-ribbed wall slab. The results show that shear span ratio, axial compression ratio and the arrangement of the reinforced ribs have remarkable effect on the wall slab’s mechanical properties; and the outer frame, the reinforced ribs and the infilling coal ash blocks have different effect on the mechanical performance of the wall slab respectively. (times new roman小五)
Keywords : multi-ribbed wall slab;simplified mathematical model;model of rigid frame with diagonal strut E-mail:[email protected]
1 密肋复合墙板的试验研究
为了研究密肋复合墙板的受力特点与破坏模式,对14榀不同形式的密肋复合墙板模型
[3-6]
引 言(黑小四加粗、宋五号)
密肋壁板轻框结构是由密肋复合墙板内嵌于隐形框架而形成的一种新型结构体系。其中密肋复合墙板以钢筋混凝土肋梁、肋柱形成截面较小的框格,内填以炉渣、粉煤灰(或其他轻质骨料)为主要原料的加气硅酸盐砌块预制而成。墙板又与隐形框架整浇为一体,形成一个完整的受力体系,共同承受竖向和水平荷载作用
[1-2]
(包括2个
足尺墙板模型和12个1/2比例缩尺墙板模型)进行了水平低周反复加载以及水平和竖向单调加载试验。试验的墙板试件和加载装置分别见图1和表1。 1.1标题层(黑五加粗、宋五号)
折减系数rh的表达式:
rh=1.1-0.01nt-0.23k (1)
式中: nt为套箍指标;k为位置系数。
1.1.1小标题层(宋五)
收稿日期:2003-08-06
。
基金项目:xx基金项目资助(56237845)、xx基金项目资助(56237845)和
xx基金项目资助(56237858)
作者简介:姓名,学历,职称
(1)往后接排层……。 (2)…………。
(a)荷载与梁的挠度曲线
(b)梁的挠度与荷载循环次数的关系(宋小五)
图1 挠度曲线(黑小五加粗) Fig.1 Curves(times new roman小五加粗) 表1 试件材性参数表(黑小五加粗)
Table1 Details of Specimens(times new roman小五加粗)
试件号 CCFT1-1 CCFT1-2 CCFT1-3 CCFT2-1 CCFT2-2 CCFT2-3
柱截面(mm) 250×250 250×250 250×250 300×300 300×300 300×300
钢管D×t(mm) 165×2.85 165×2.85 165×2.85 219×3.52 219×3.52 219×3.52
2
柱箍筋 6@50 6@50 6@50 6@50 6@50 6@50
柱箍筋体积率
1% 1% 1% 0.84% 0.84% 0.84%
fcu 40.5 42.5 39.6 39.1 40.7 38.9
fy 340.3 340.3 340.3 308.5 308.5 308.5
注: 1钢管屈服强度fy、混凝土立方体强度强度fcu的单位均为N/mm。(六宋)
2柱中方箍 6钢筋屈服强度412.6N/mm。
3柱纵筋412,屈服强度为362.3 N/mm,极限强度为559.7 N/mm。
2
2
2
参 考 文 献(黑小五加粗、time new roman小五、宋小五) [1] Achkire Y, Preumont A. Flutter control of cable-stayed
bridges [C]// Proc.2nd Eacwe. Genova, Italy, 1997 [2] Miyata T, Yamada H, Dung N, et al. Proposed measures for
flutter control inlong span beidges[C]//Proc.15th Congress IABSE.Copenhagen, Denmark, 1996
[3] 姚念亮,董明,杨联萍,等.焊接空心球节点的承载能力分
析[J]. 建筑结构, 2000, 30(4): 36-38(Yao Nianliang,Dong Ming, Yang Lianping, et al. Analysis of the bearing capacity of the welded spherical joint [J]. Building Structure, 2000, 30(4): 36-38(in Chinese))
[4] 中华人民共和国行业标准. JGJ 61─2003网壳结构技术规
程[S].北京:中国建筑工业出版社,2003(Professional Standard of the People’s Republic of China. JGJ61—2003
Technical specification for reticulated shells[J]. Beijing: China Architecture and Building Press, 2003 (in Chinese)) [5] 韩庆华, 潘延东, 刘锡良. 焊接空心球节点的拉压极限承
载力分析[J]. 土木工程学报, 2003, 36(10): 1-6(Han Qinghua, Pan Yandong, Liu Xiliang. Analysis for the ultimate tensil and compressive bearing capacity of welded hollow spherical joints[J]. China Civil Engineering Journal, 2003, 36(10): 1-6(in Chinese))
[6] 网架结构设计与施工规程编制组. 网架结构设计与施工
─—规程应用指南[M]. 北京:中国建筑工业出版社,1995 [7] 王亮. 圆钢管焊接空心球节点试验研究报告[R].杭州:浙江
大学,2004
[8] 周学军. 网架结构超大直径焊接空心球节点破坏机理分析
及其承载能力的试验研究[D]. 天津:天津大学,1996
注:参考文献的英译以原文为准,原文没有的不用列出,不必自行翻译。