洒水车配置说明

THE SPECIFICATION OF THE TANK

VOLUME: 20

CIMC VEHICLES (SHANDONG) CO., LTD

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

CONTENT

Company Profile …………………………………… 2 The s ket ch o f the ta nk tr uck ……………… 3 THE SPECIFICATION OF THE CHASSIS ………………4 Ma in s p e c if ic a t io n of v e h ic le ……………… 5 Main material &manufacture technology …………… 5 MAIN EQUIPMENTS OF THE VEHICLE ……………… 6 The pictures of the vehicle ……………………… 7

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

Profile of CIMC VEHICLES (SHANDONG) CO., LTD

Started in 1993, Famous Brand in China Today. CIMC VEHICLES (SHANDONG) CO.,LTD, A joint venture, which is consisted of Shenzhen CIMC heavy Duty Machinery Co., Ltd., Jinan Automobile Refitting Factory, Kogel Fahrzeugwerke AG , and CIMC Vehicle Investment Holdings Company Limited. It is also a backbone enterprise of special refitting trucks in North China. Today, CIMC SHANDONG has an occupying area 4, 5300 square meter as production base, which is divided into 13 sections, 13 workshops, has 1500 staff members and workers, including 90 middle & senior technicians. This company has been the capacity to produce and sell various special refitting trucks 10, 000 units a year.

Today, CIMC VEHICLES (SHANDONG) CO.,LTD has produced box, oil tank, engineering, semi-trailers and special trucks series, army trucks series, etc., 6 series, more than 150 model, to suit for various special products from 0. 5-40tons. Of which, the emergency telecommunications trucks had been widely used in China Mobile, and China Union. In 2003, CIMC VEHICLES (SHANDONG) CO., LTD has established strategy cooperation with VOLVO, and produced the VOLVO tippers with world levels. On March 16, 2004, the first batch tippers had been exported to Africa.

International Certificate and Production Management System Approved; Key customers covered all over the world. CIMC VEHICLES (SHANDONG) CO., LTD had achieved the ISO9001 quality system certificate and CCC issued by CQC. Our sincerely customers: Coca-Cola, Pepsi Cola, Nestle, Wall’s, McDonald’s, KFC, China Post, China Petroleum, China Chemical, Haier Group, China Mobile, China Union, China Army, etc.

NOW, the new production base of CIMC VEHICLES (SHANDONG) CO., LTD had been constructed in Mingshui Economic Developing Zone, Zhangqiu, Jinan city, Shandong which is on behalf of the advanced levels at same industry in China. CIMC VEHICLES (SHANDONG) CO., LTD will face to the challenge of development in the future by leaps and bounds. In the future, CIMC SHANDONG will adhere to study and develop new products, keep the leading position in special automobile industry of China, make use of group advantage, foot at home, face to international market, built it into a special truck manufacturing base with producing and selling 30, 000 units a year and sales income 4 billon yuan. Do our best to provide with facilities and service for modern transportation.

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

THE SKETCH OF THE SEMI-TRAILER

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

THE SPECIFICATION OF THE CHASSIS

Engine

Make and model….. ……..STEYR WD615.87 Type ………….. Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging & intercooling

Displacement ................................ 9.726 liters Maximum output….290 @ 2200 rpm(213KW

@2200 rpm)

Max. Torque........... 1160NM@1300-1600 rpm Bore …………………………………...126 mm Stroke …………………………………130 mm Mean piston speed …………………29.8hp/l Specific fuel consumption..……...198 g/kWh Engine oil filling quantity …………….40liters Cooling system filling quantity ….40 liters Thermostat with 71℃ opening begin Rigid fan

Brakes

Service brake..Double circuit pneumatic brake Parking brake ....Spring-powered air-cut off brake

Assistant brake............Engine exhaust brake

Cabin

All-steel forward control, 70° hydraulically tiltable to the front, 3-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat & rigid adjustable co-driver's seat, heating & ventilation system, adjustable roof flap, with stereo radio/cassette recorder, air conditioner, adjustable steering wheel.

Optional equipment …………safety belt , high double deck, air suspension driver’s seat

Clutch

Electric equipment

Model ………................................ZF8095

Type ........................……. Single -plate dry coil-clutch, mechanically operating with air assisted

Plate diameter..............……............. φ420mm

Operating voltage ……..24 V , negative grounded

Starter ………………………………24 V, 5.4 kW Alternator …………….. 1000W

Battery voltage / capacitance.2*12V/135Ah

Gearbox

Cigar-lighter, horn, headlamp, fog light, reverse light Optional…….1540 W alternator

Model …………………. ……8JS100B/9JS119 Active check control with indicators, with this No. of speeds................... 9 forward,1 reverse instrument the daily manual checks on the Forward ratio ............................11.40; 7.94; vehicle and combined indicators of 5.63; 4.06; 2.81; 1.96; 1.39; 1.0/12.11; 8.08; compressed air pressure, coolant temperature, 5.93; 4.42; 3.36; 2.41; 1.76; 1.32; 1.00 engine oil pressure and battery charging Reverse ratio..................... 11.35/12.66 Front wheel alignment Camber .………………. ………………..........1º Front axle Caster .....……………. …………………........3º Type .….Rigid stub axle with double T-cross King pin inclination...………………….......1º members Toe-in(measured at the wheel diameter φMax. 648mm with cross-ply tire) ........3-4.5mm load ................................................7000Kg Overall dimension (length×width ×Tandem axle height) ….9180×2496×3088mm Type ..........……Pressed axle housing, single

Wheelbase ...4325+1350mm reduction with planetary wheel reduction

Track Ratio ............................………...4.8

Front .....……………. ……….....1939/1958mm Max. load...................................... 2×9000Kg

Rear . ......………………………1800/1830mm

Frame

Approach angle...…………………….......15º

Type ...... Parallel ladder with U-profiles and

Departure angle.......……………………...24º

riveted cross members

Front overhang................................ 1560mm

Steering

Rear overhang.................……........... 1945mm

Type .....................................................ZF8098

Performance

Ratio .......................……….....................20.1

Max. Speed......……………………....90 km/h

Fuel tank capacity..........…..............200liters

Turning circle diameter..………… .. 21.6m

Wheels and tires

Mass parameter

Rim ……....... ...…....................................8.5-20

Kerb mass of cab and chassis.....9100Kg

Tire ……. ..........…………......12.00-20 18PR

Total mass.........…………………….25000Kg Fuel consumption.....………….... 30L/100Km

Instrument panel

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

MAIN SPECIFICATION OF VEHICLE

MAIN MATERIAL AND MANUFACTURE TECHNOLOGY

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

MAIN EQUIPMENTS OF THE VEHICLE

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]

MANHOLE

Tel ：（86）531 85833047 Fax :(86) 531 85833027 E-MAIL: [email protected]