毕业设计说明书摘要部分
摘要
关键词:新风、空调设计、空调系统、风机盘管
本工程是北京市某办公楼。建筑物地上总共十二层,总高度为42米,建筑面积约为5473.44平方米。它主要功能是办公、商铺。
根据建筑物房间的功能以及建筑的布局办公室及商铺均采用了风机盘管加新风的送风方式。室内回风经风机盘管处理后和新风混合送入各空调房间。有卫生间的客房各层风机盘管产生的凝结水统一排放到地漏,本设计各层均设一个吊顶式新风机组,新风由室外新风口采集,经处理后分别供给各个房间,以满足系统对新风量的需求。气流组织为上送上回,送风口采用散流器送风,回风口采用单层活动百叶风口,风口尺寸大小相同。
机房位于地上一层设备机房,机房选用了两台水冷式半封闭式双螺杆式冷水机组,机组的冷冻水供水回水温度为7—12oC。冬夏季节进行阀门转换。
系统中水管的布置采用同程式,为两管制。冷水经过冷水机组、循环水泵送到新风机组和各个风机盘管。为了满足节能和舒适性的要求进行了保温和消声设计。保温材料选用的是玻璃棉管壳保温材料。考虑到房间对噪音的要求在每台新风机组出口设置了消声器。 This project is an office building of Beijing. A total of twelve-story building on the ground, with a total height of 42 meters, the floor area of approximately 5,473.44 square meters. Its main function is to office, shops.
According to the function of the building and room layout of office and shop building are used for air supply fan coil plus fresh air mode.After the indoor fan coil return air and fresh air after mixing into the air-conditioned room. The rooms have a bathroom fan coil layers of water discharge are the condensation to the floor drain, the design of each floor are equipped with a new ceiling-type air handling units, fresh air vent from the outside the new acquisition, supply, respectively, after treatment in each room to meet the new system air traffic demand.Sent back to the upper air flow, air outlet with air diffuser, return air vent louvers using single activity, the same size as outlet.
Equipment room at ground floor room, room selected two semi-enclosed water-cooled screw chiller, chilled water supply return unit temperature 7-12℃. Winter and summer seasons, the valve conversion.
Water system layout using the same program as the two control
After cold water chillers, circulating pumps to the individual fan coil units and fresh air. In order to meet energy efficiency and comfort requirements of the insulation and muffler design.Glass wool insulation material is selected shell insulation materials. Taking into account the requirements of the room noise air unit in the export of each set of new muffler.
目 录
绪论………………………………………………………………………………………1
第1章 设计依据………………………………………………………………………2
1.1 气象资料……………………………………………………………………………3
1.2 室内设计参数…………………………………………………………………… 3
1.3 土建资料………………………………………………………………………… 3
1.3.1 建筑信息………………………………………………………………………3
1.3.2 维护结构资料…………………………………………………………………3
第2章 空调系统冷负荷计算……………………………………………………4
2.1 外围护结构冷负荷……………………………………………………………… 4
2.1.1 外墙及屋面瞬变传热引起的冷负荷……………………………………… 4
2.1.2 外窗冷负荷…………………………………………………………………5
2.2 内围护结构冷负荷………………………………………………………………6
2.3 人员冷负荷………………………………………………………………………6
2.3.1显热冷负荷…………………………………………………………………6
2.3.2潜热冷负荷…………………………………………………………………7
2.4 照明冷负荷………………………………………………………………………7
2.5 设备冷负荷………………………………………………………………………8
2.6 冷负荷计算汇总…………………………………………………………………10
2.7 新风量的确定………………………………………………………………… 10
2.8 空调湿负荷的计算………………………………………………………………11
2.9整个楼的面积热指标计算………………………………………………………12
2.10热湿比的计算………………………………………………………………………12
2.11送风量的确定………………………………………………………………………12
第3章 空调系统方案的确定…………………………………………………13
3.1 空调系统方案的比较……………………………………………………………13
3.2空调系统方案的确定……………………………………………………………15
3.3系统的焓湿图……………………………………………………………………16
第4章 空调风系统……………………………………………………………… 16
4.1空调系统的风道………………………………………………………………… 16
4.1.1风道材质…………………………………………………………………… 16
4.2风道的水力计算……………………………………………………………………17
4.2.1水力计算的类型………………………………………………………………17
4.2.2水力计算的方法与原理………………………………………………………17
4.2.3新风机组的选型………………………………………………………………18
4.2.4确定新风机组,风机盘管负担的冷量………………………………………18
4.3风口及其气流组织…………………………………………………………………19
4.3.1气流组织方式…………………………………………………………………19
4.3.2气流组织计算…………………………………………………………………20
第5章 空调水系统设计 …………………………………………………………20
5.1各层冷冻水系统的水力计算………………………………………………………20
5.1.1水力计算的主要目的…………………………………………………………22
5.1.2管径的确定方法………………………………………………………………22
5.1.3供回水环路的压力损失………………………………………………………22
5.2冷冻水泵的选型……………………………………………………………………23
5.2.1空调冷水泵的选型……………………………………………………………23
5.2.2水泵配管………………………………………………………………………24
5.3冷水机组的选型…………………………………………………………………… 24
5.3.1制冷装置选型的一般规定……………………………………………………24
5.3.2制冷机组的选型……………………………………………………………… 24
5.4冷却水系统………………………………………………………………………… 25
5.4.1冷却塔选型…………………………………………………………………… 25
5.4.2冷却水循环泵的选择………………………………………………………… 27
5.4.3冷却水补水泵…………………………………………………………………28
5.5水系统的定压………………………………………………………………………28
5.5.1定压方式………………………………………………………………………28
5.5.2定压点…………………………………………………………………………28
5.6水系统的设备和附件………………………………………………………………28
5.6.1冷凝水管的设计………………………………………………………………28
5.6.2膨胀水箱水量的计算和选型………………………………………………29
5.6.3分水器和集水器的选择………………………………………………………31
5.6.4过滤器…………………………………………………………………………31
第6章 空调冷、热源系统的确定及选型………………………………32
6.1 方案确定及可行性…………………………………………………………………32
6.1.1系统方案………………………………………………………………… 32
6.1.2 方案的可行性………………………………………………………………32
6.1.3 选型的结果…………………………………………………………………32
第7章 水系统的泄水及排气…………………………………………………33
7.1泄水设计………………………………………………………………………………33
7.2排气设计……………………………………………………………………………33
第8章 空调系统的消声、防振及保温……………………………………33
8.1消声设计……………………………………………………………………………33
8.2减振设计……………………………………………………………………………34
8.3管道的保温…………………………………………………………………………34
第9章 建筑防排烟设计……………………………………………………………35
9.1机械排烟系统的设计要点……………………………………………………………36
9.2中庭机械排烟量………………………………………………………………………36
第10章 空调热负荷的计算………………………………………………………36 10.1维护结构的基本耗热量引起的热负荷……………………………………………37 10.2修正基本耗热量………………………………………………………………………37 10.3维护结构传热面积的丈量……………………………………………………………38 谢辞…………………………………………………………………………………………38 参考文献…………………………………………………………………………………39 附录