巴氏合金轴瓦的焊接修复
龙源期刊网 http://www.qikan.com.cn
巴氏合金轴瓦的焊接修复
作者:刘泽林 郑宏伟 李海豹 周喜顺
来源:《科技视界》2013年第34期
【摘 要】本文介绍了利用氧—乙炔的焊接方法对巴氏合金轴瓦进行修复的工艺,通过该工艺可以有效的修复损坏的巴氏合金轴瓦,提高巴氏合金轴瓦的重复利用率,减小因巴氏合金轴瓦损坏而造成的资金和时间损失。
【关键词】修复;轴瓦;焊接;巴氏合金
Repair Welding of Babbitt Axle Bush
LIU Ze-lin ZHENG Hong-wei LI Hai-bao ZHOU Xi-shun
(52 Institute,China Ordnance Industries Group,Baotou Inner-Mongolia 014034,China )
【Abstract 】This paper presents a technology of repair welding of babbitt axle bush by using welding method of oxygen-acetylene,this technology can effectively repair the damaged babbitt bush ,improve the repeating utilization factor,and reduce the loss of money and time caused by damaged babbitt bush.
【Key words】Repair ;Axle bush;Welding ;Babbitt
1 巴氏合金
巴氏合金由美国人巴比特发明,又称白合金[1]。巴氏合金的主要成分为:锡、铅、锑、铜,锑、铜用以提高合金的强度和硬度[2]。因其有良好的耐磨性、导热性以及特殊的组织结构有利于减少摩擦,从而广泛用于大型机械的主轴轴瓦、轴套等。
巴氏合金分为锡基合金和铅基合金,因锡基合金的强度、硬度和耐蚀性较铅基合金强,所以应用较为广泛,其常用牌号有ZChSnSb11-6、ZChSnSb8-4等。而铅基合金的造价较锡基合金低,也是部分客户的首选,其常用牌号有ZChPbSb16-16-2、ZChPbSb1-16-1等。 2 巴氏合金轴瓦的损伤因素
2.1 供油不足或缺油运行导致巴氏合金轴瓦表面烧熔,造成此类损坏主要原因是没有及时添加润滑油以及油泵损坏(见图1);
图1 表面烧熔轴瓦示意图